Shop headings: New Spares | Used Spares | Accessories | Brands
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit
1 in stock
£205.00
INC VAT
£170.83 EX VAT
Chrome bar end mirror with a large round head and adjustable arm. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.
Can be fitted on either left or right hand side of handlebars. Shown here fitted to a handlebar which is not included
1 in stock
£30.90
INC VAT
£25.75 EX VAT
Pair of black alloy bar end extensions to enable fitment of Clubman mirrors to V7 and V9 models with threaded handlebar ends without needing to move switchgear inboard. Mirrors can be fitted without these but the handlebars need drilling for the switchgear locating pegs
1 in stock
£39.00
INC VAT
£32.50 EX VAT
Pair of short reverse cone stainless steel performance silencers from Mistral, the reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
No remap required
Also available in polished finish
Euro 4 compliant
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.
Silencer gaskets now included with these silencers
Release the music in your Guzzi!
See this video to hear this silencer
1 in stock
£675.00
INC VAT
£562.50 EX VAT
Lightweight M20 gearbox and drive box filler plug (big twins), drive box level plug (small twins). An aluminium filler plug made in Italy.
1 in stock
12022600 GU12022600 12 02 26 00
1202 2600 1202.2600 12.02.26.00
£26.00
INC VAT
£21.67 EX VAT
Pair of short black reverse cone stainless steel performance silencers from Mistral, the short reverse cone design compliments the pared back styling of the V9 models. Supplied with DB killer, gaskets and shorter black heat shields these are a more durable, stylish, lighter and better sounding than the original silencers.
Also available in satin or polished finish.
Euro 5 compliant
Useful increase in power and torque compared to the original silencers
5kg weight saving!
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Centre stands are compatible with these silencers and no special bracket is required.
No remap required No changes to the ECU map are required
Release the music in your Guzzi!
1 in stock
£790.00
INC VAT
£658.33 EX VAT
Thick protective tank cover for your workshop. Ideal for preventing expensive damage to your motorcycle tank when working on your bike (avoid brake fluid spills etc...) and also useful for leaving on your bike when not in use to avoid accidental scratches. Special anti-slip material on underside secures cover to your motorcycle tank when in use. Upper side is nylon for ease of cleaning.
1 in stock
£18.00
INC VAT
£15.00 EX VAT
Large dust cover for your bike when parked up in your garage. Prevents dust and dirt settling on your pride and joy. Also useful for hiding your bike from prying eyes when your garage door is open. Also see tank protector SIA00001 for extra protection.
Breathable, tear resistant fabric.
1 in stock
£19.00
INC VAT
£15.83 EX VAT
This handlebar riser kit moves the handlebars up by 35mm resulting in much improved comfort. Finished in black, this is a high quality Italian engineered kit. For yokes with 32-35mm clamp bolt centres
Kit contains fitting instructions, zinc finish bolts, bolt head plugs and risers. Normally this kit can be fitted without modifying your brakelines or control cables.
Improve riding comfort with this riser kit
1 in stock
£45.00
INC VAT
£37.50 EX VAT
HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434.
Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
1 in stock
£160.00
INC VAT
£133.33 EX VAT